Have you ever had a plumbing issue that made your day miserable? Maybe your faucet was dripping, your drain was blocked, your toilet was running, or your shower was weak.  You wanted to fix it yourself, but you didn’t know how.  You didn’t want to spend money on a plumber, but you also didn’t want to live with the problem.  Well, don’t worry.  Some of the most common problems with your home’s plumbing can be solved with the help of some simple and effective DIY plumbing hacks. But if you don’t want to get your hands dirty while performing plumbing, it’s always wise to choose Professional Plumbing Service Providers

 Five Super Simple and Useful DIY Plumbing Tips

1. Stop the gurgling from your toilet.

A running toilet is not only annoying, but also wasteful and expensive.  It can waste up to 200 gallons of water per day and increase your water bill significantly.  One of the main causes of a running toilet is a faulty flapper valve, which is the rubber seal that stops the water from flowing into the bowl after each flush.

To fix this, you can try adjusting the chain that connects the flapper to the flush handle, or replacing the flapper with a new one.  Another possible cause is a leaky fill valve, which is the device that controls the water level in the tank.

In addition, you might try adjusting the water level-regulating float arm or cleaning or replacing the fill valve. You can also use food colouring to test for leaks in your toilet tank.  Just add a few drops of food colouring to the tank and wait for 15 minutes.  If you see any colour in the bowl, you have a leak.

    2. Get your garbage disposal unclogged.

Although garbage disposals are great for disposing of food waste, they may eventually become clogged, clogged, or smelly. To fix a jammed disposal, you can try using an Allen wrench to manually turn the blades from underneath the unit or using a wooden spoon or plunger to dislodge any stuck objects from above.  If your disposal is clogged, you can try running hot water and dish soap through it or using baking soda and vinegar to create a fizzing reaction that can loosen any debris.  Additionally, grinding citrus peels, ice cubes, or baking soda can assist in freshening up an unpleasant disposal smell.

   3. Make Your Sink Drain Clear Sink drains

can get clogged by hair, soap scum, grease, and other materials that accumulate over time.  You can remove any obstructions from your sink drain by using a plunger, a drain snake, or a coat hanger. You can also try using baking soda and vinegar, or boiling water and salt, to dissolve any grease or organic matter .  Another DIY plumbing hack is to use wet/dry sandpaper to remove any hard water stains or mineral deposits from your chrome faucets or shower heads.

4. Boost Your Shower Pressure

Using a shower with low pressure can be less enjoyable and less effective. A clogged shower head, which can be brought on by rust, hard water deposits, or dirt, is one of the main causes of low shower pressure. To boost your shower pressure, you can try soaking your shower head in vinegar overnight, or using a toothbrush or a needle to clean the holes.  You can also try replacing your old shower head with a new one that has more holes or different spray patterns.

5. Clean Your Water Heater

A water heater is an essential appliance that provides hot water for your home.  However, sediment and minerals can accumulate within the tank over time, reducing its effectiveness and lifespan. To clean your water heater, you can follow these steps:

Turn off the power and gas supplies to your water heater.

Connect a garden hose to the tank’s drain valve at the bottom. Let the water flow out of the drain until it is clear by opening the valve. Close the drain valve and refill the tank with cold water.

Turn on the power and gas supply to your water heater.

Cleaning your water heater once a year can help prevent corrosion, improve performance, and extend its life.